公司简介   ǀ  新闻   ǀ  品牌   ǀ  联系我们

1240

  • 特征

      • 温度系数≤10 ppm / K
      • 额定负载20 W
      • 范围1mΩ... 100mΩ
      • 四端子测量原理
      • 精度0.02%
      • 对于技术频率50 Hz


  • 产品数据

    Model1240
    Resistance value

    10 μΩ
    25 μΩ
    50 μΩ
    100 μΩ
    200 μΩ
    500 μΩ
    1 mΩ
    2 mΩ
    5 mΩ
    10 mΩ
    20 mΩ
    50 mΩ
    100 mΩ
    200 mΩ
    500 mΩ
    1 Ω
    2 Ω
    5 Ω
    10 Ω
    20 Ω
    50 Ω
    100 Ω
    200 Ω
    500 Ω
    1 kΩ
    2 kΩ
    5 kΩ
    10 kΩ
    20 kΩ
    50 kΩ
    100 kΩ

    Tolerance

    ± 0.02 %
    ± 0.03 %
    ± 0.05 %
    ± 0.1 %
    ± 1 %

    Temperature coefficient≤ ± 10 ppm/K
    Storage stability< ± 0.01 % over years
    Power2.5 W
    Range of operating temperature0 ... +23 ... +40 °C
    Specific characteristics

    • Low capacitance and low inductance design
    • Suitable for direct current and technical frequencies
    • High stability < ± 0.01 % over years



  • 说明

    The 0.02 class calibration resistors excel in their modern design and small mechanical dimensions. Their ruggedness also ensures a long life. Calibration resistors of the 1240 series are used wherever very constant operating standards are required. 

    Typical main areas of application therefore include:

    • When normal resistors prove to be too large scale
    • For test and calibration of resistance measurement devices
    • For tests on electrical temperature measuring equipment
    • For laboratory setup of a Wheatstone bridge
    • As shunt resistor for accurate current measurement
    • As part of standard equipment in research laboratories
    • For a large part of measurements in calibration laboratory.

    A test certificate according to ISO 9000 with detailed technical data is included in the scope of delivery of these high-quality calibration resistors.

    DKD/DAkkS Calibration Certificate

    The calibration laboratory D-K-15141-01-00 at burster praezisionsmesstechnik gmbh & co kg is supervised by DAkkS (Deutsche Akkreditierungsstelle GmbH) according to ISO 17025. 
    It can prove its status by a certificate and is authorized to issue calibration certificates with the DAkkS logo and with the DKD logo (Deutscher Kalibrierdienst). 
    These calibration certificates are internationally approved by multilateral contracts.

    Manufacturer Calibration Certificate

    Please refer to DKD/DAkkS Calibration Certificate but with reduced accuracy. The calibration resistors can also be delivered with a manufacturer calibration certificate. It confirms the traceability of the used secondary voltage and resistance standards to the national standards according to DIN ISO 9000ff and is guaranteed by our certified calibration laboratory (D-K-15141-01-00).


  • 产品介绍和下载


  • 附件

  • 视频


相关产品

上海盘卓自动化科技有限公司 | 地址:上海市松江区沈砖公路5666号A602室 | 公安备案号:31011702002799  |   Tel:021-57688021  |  Email:info@pandauto.com  |  沪ICP备12000819号  
nach